Guías de Implementación FHIR Receta Digital | Ministerio de Salud
1.1.0-ballot - ci-build Costa Rica flag

Guías de Implementación FHIR Receta Digital | Ministerio de Salud - Local Development build (v1.1.0-ballot) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Extension: LotNumber - Detailed Descriptions

Page standards status: Draft Maturity Level: 0

Definitions for the lot-number extension.

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition

Extensión compuesta que incluye número de lote y cantidad.


Optional Extension Element - found in all resources.

ShortInformación del lote del medicamentoOptional Extensions Element
Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control10..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Extension.extension:lotNumber
    Slice NamelotNumber
    Definition

    Código que identifica el número de lote del medicamento

    ShortNúmero de lote del medicamentoAdditional content defined by implementations
    Control10..1*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    6. Extension.extension:lotNumber.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..0*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 8. Extension.extension:lotNumber.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      Fixed ValuelotNumber
      10. Extension.extension:lotNumber.value[x]
      Definition

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      ShortValue of extension
      Control10..1
      Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
      • type @ $this
      • 12. Extension.extension:lotNumber.value[x]:valueString
        Slice NamevalueString
        Definition

        Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

        ShortValue of extension
        Control10..1
        Typestring, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. Extension.extension:quantity
        Slice Namequantity
        Definition

        Cantidad total dispensada del medicamento en ese lote

        ShortCantidad del medicamento del loteAdditional content defined by implementations
        Control0..1*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        16. Extension.extension:quantity.extension
        Definition

        An Extension


        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortExtensionAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..0*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 18. Extension.extension:quantity.url
          Definition

          Source of the definition for the extension code - a logical name or a URL.

          Shortidentifies the meaning of the extension
          Comments

          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

          Control1..1
          Typeuri
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          Fixed Valuequantity
          20. Extension.extension:quantity.value[x]
          Definition

          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

          ShortValue of extension
          Control0..1
          TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • type @ $this
          • 22. Extension.extension:quantity.value[x]:valueInteger
            Slice NamevalueInteger
            Definition

            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

            ShortValue of extension
            Control0..1
            Typeinteger, date, Meta, Address, Attachment, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. Extension.url
            Definition

            Source of the definition for the extension code - a logical name or a URL.

            Shortidentifies the meaning of the extension
            Comments

            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

            Control1..1
            Typeuri
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            Fixed Valuehttps://ministeriodesalud.go.cr/fhir/receta/StructureDefinition/lot-number
            26. Extension.value[x]
            Definition

            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

            ShortValue of extension
            Control0..01
            TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

            Guidance on how to interpret the contents of this table can be foundhere

            0. Extension
            Definition

            Extensión compuesta que incluye número de lote y cantidad.

            ShortInformación del lote del medicamento
            2. Extension.extension
            Control1..?
            4. Extension.extension:lotNumber
            Slice NamelotNumber
            Definition

            Código que identifica el número de lote del medicamento

            ShortNúmero de lote del medicamento
            Control1..1
            6. Extension.extension:lotNumber.extension
            Control0..0
            8. Extension.extension:lotNumber.url
            Fixed ValuelotNumber
            10. Extension.extension:lotNumber.value[x]
            Control1..?
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • type @ $this
            • 12. Extension.extension:lotNumber.value[x]:valueString
              Slice NamevalueString
              Control1..1
              Typestring
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              14. Extension.extension:quantity
              Slice Namequantity
              Definition

              Cantidad total dispensada del medicamento en ese lote

              ShortCantidad del medicamento del lote
              Control0..1
              16. Extension.extension:quantity.extension
              Control0..0
              18. Extension.extension:quantity.url
              Fixed Valuequantity
              20. Extension.extension:quantity.value[x]
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • type @ $this
              • 22. Extension.extension:quantity.value[x]:valueInteger
                Slice NamevalueInteger
                Control0..1
                Typeinteger
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                24. Extension.url
                Fixed Valuehttps://ministeriodesalud.go.cr/fhir/receta/StructureDefinition/lot-number
                26. Extension.value[x]
                Control0..0

                Guidance on how to interpret the contents of this table can be foundhere

                0. Extension
                Definition

                Extensión compuesta que incluye número de lote y cantidad.

                ShortInformación del lote del medicamento
                Control0..*
                This element is affected by the following invariants: ele-1
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                2. Extension.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                4. Extension.extension
                Definition

                An Extension

                ShortExtension
                Control1..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 6. Extension.extension:lotNumber
                  Slice NamelotNumber
                  Definition

                  Código que identifica el número de lote del medicamento

                  ShortNúmero de lote del medicamento
                  Control1..1
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  8. Extension.extension:lotNumber.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  10. Extension.extension:lotNumber.extension
                  Definition

                  An Extension

                  ShortExtension
                  Control0..0
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 12. Extension.extension:lotNumber.url
                    Definition

                    Source of the definition for the extension code - a logical name or a URL.

                    Shortidentifies the meaning of the extension
                    Comments

                    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                    Control1..1
                    Typeuri
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    Fixed ValuelotNumber
                    14. Extension.extension:lotNumber.value[x]
                    Definition

                    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                    ShortValue of extension
                    Control1..1
                    Typestring
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                    • type @ $this
                    • 16. Extension.extension:lotNumber.value[x]:valueString
                      Slice NamevalueString
                      Definition

                      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                      ShortValue of extension
                      Control1..1
                      Typestring
                      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      18. Extension.extension:quantity
                      Slice Namequantity
                      Definition

                      Cantidad total dispensada del medicamento en ese lote

                      ShortCantidad del medicamento del lote
                      Control0..1
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      20. Extension.extension:quantity.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      22. Extension.extension:quantity.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control0..0
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 24. Extension.extension:quantity.url
                        Definition

                        Source of the definition for the extension code - a logical name or a URL.

                        Shortidentifies the meaning of the extension
                        Comments

                        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                        Control1..1
                        Typeuri
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        Fixed Valuequantity
                        26. Extension.extension:quantity.value[x]
                        Definition

                        Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                        ShortValue of extension
                        Control0..1
                        TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • type @ $this
                        • 28. Extension.extension:quantity.value[x]:valueInteger
                          Slice NamevalueInteger
                          Definition

                          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                          ShortValue of extension
                          Control0..1
                          Typeinteger
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          30. Extension.url
                          Definition

                          Source of the definition for the extension code - a logical name or a URL.

                          Shortidentifies the meaning of the extension
                          Comments

                          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                          Control1..1
                          Typeuri
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          Fixed Valuehttps://ministeriodesalud.go.cr/fhir/receta/StructureDefinition/lot-number
                          32. Extension.value[x]
                          Definition

                          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                          ShortValue of extension
                          Control0..0
                          TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))