Guías de Implementación FHIR Receta Digital | Ministerio de Salud
1.1.0-ballot - ci-build Costa Rica flag

Guías de Implementación FHIR Receta Digital | Ministerio de Salud - Local Development build (v1.1.0-ballot) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: RelatedPersonRD - Detailed Descriptions

Page standards status: Draft Maturity Level: 0

Definitions for the related-person resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. RelatedPerson
Definition

Information about a person that is involved in the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process.

ShortA person that is related to a patient, but who is not a direct target of care
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. RelatedPerson.id
Definition

Identificador único de la persona relacionada dentro del sistema.


The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortIdentificador único de la persona relacionada dentro del sistema.Logical id of this artifact
Comments

Este es el identificador único de la persona relacionada dentro del sistema.


The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeidstring
Is Modifierfalse
Summarytrue
4. RelatedPerson.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..01
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. RelatedPerson.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. RelatedPerson.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. RelatedPerson.identifier
Definition

Este es el listado de identificaciones de una persona relacionada con el paciente.


Identifier for a person within a particular scope.

ShortLista de los identificadores de la persona relacionada.A human identifier for this person
NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..1*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. RelatedPerson.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Fixed Valueofficial
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. RelatedPerson.identifier.type
Definition

Se define como tipo de documento de identificación, referente a los tipos definidos en el sistema para personas relacionadas.


A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortTipo de documento de identificación (Extensible)Description of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control10..1
BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from Tipo de identificaciónhttp://hl7.org/fhir/ValueSet/identifier-type|4.0.1
(required to https://ministeriodesalud.go.cr/fhir/receta/ValueSet/idTypes)

ValueSet de tipos de identificación permitidos para personas relacionadas en Costa Rica.


A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. RelatedPerson.identifier.type.coding
Definition

Código de tipo de identificación de la persona relacionada.


A reference to a code defined by a terminology system.

ShortCódigo de tipo de identificación de la persona relacionada.Code defined by a terminology system
Comments

Código de tipo de identificación de la persona relacionada.


Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control10..1*
TypeCoding
Is Modifierfalse
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. RelatedPerson.identifier.type.coding.system
Definition

Sistema de identificación de la persona relacionada.


The identification of the code system that defines the meaning of the symbol in the code.

ShortSistema de identificación de la persona relacionada.Identity of the terminology system
Comments

Sistema de identificación de la persona relacionada.


The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. RelatedPerson.identifier.type.coding.code
Definition

Código del tipo de identificación de la persona relacionada.


A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortCódigo del tipo de identificación de la persona relacionada.Symbol in syntax defined by the system
Comments

Código del tipo de identificación de la persona relacionada.

Control10..1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. RelatedPerson.identifier.type.coding.display
Definition

Descripción del código de tipos de identificación para la persona relacionada.


A representation of the meaning of the code in the system, following the rules of the system.

ShortDescripción del código de tipos de identificación para la persona relacionada.Representation defined by the system
Comments

Descripción del código de tipos de identificación para la persona relacionada.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. RelatedPerson.identifier.type.text
Definition

Nombre del valor de tipo de identificación de la persona relacionada.


A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortNombre del valor de tipo de identificación de la persona relacionada.Plain text representation of the concept
Comments

Nombre del valor de tipo de identificación de la persona relacionada.


Very often the text is the same as a displayName of one of the codings.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. RelatedPerson.identifier.system
Definition

Sistema de identificación de la persona relacionada.


Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortSistema de identificación de la persona relacionada.The namespace for the identifier value
Comments

Sistema de identificación de la persona relacionada.


Identifier.system is always case sensitive.

Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

ExampleGeneral: http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. RelatedPerson.identifier.value
Definition

Número de identificación o documento de la persona relacionada.


The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortNúmero de identificación o documento de la persona relacionada.The value that is unique
Comments

Número de identificación o documento de la persona relacionada.


If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
ExampleGeneral: 123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. RelatedPerson.active
Definition

Whether this related person record is in active use.

ShortWhether this related person's record is in active use
Comments

This element is labeled as a modifier because it may be used to mark that the resource was created in error.

Control0..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to mark a related person record as not to be used, such as if it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. RelatedPerson.patient
Definition

Referencia al recurso Patient al que está asociada esta persona relacionada (por ejemplo, un familiar o cuidador).


The patient this person is related to.

ShortPaciente vinculado a la persona relacionada.The patient this person is related to
Comments

Esta referencia debe apuntar únicamente a un recurso Patient.

Control1..1
TypeReference(Patient, Patient)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

We need to know which patient this RelatedPerson is related to.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. RelatedPerson.patient.reference
Definition

Identificador del recurso Patient vinculado a esta persona relacionada.


A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

ShortReferencia al pacienteLiteral reference, Relative, internal or absolute URL
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

Control10..1
This element is affected by the following invariants: ref-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. RelatedPerson.patient.display
Definition

Nombre del paciente con quien está relacionada esta persona.


Plain text narrative that identifies the resource in addition to the resource reference.

ShortNombre del pacienteText alternative for the resource
Comments

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. RelatedPerson.name
Definition

Nombre completo de la persona relacionada con el paciente.


A name associated with the person.

ShortNombre de la persona relacionada.A name associated with the person
Comments

Es un elemento clave para la identificación inicial. En Costa Rica, los nombres tienen alta especificidad (dos apellidos), lo que aumenta la precisión del matching.

Control10..1*
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. RelatedPerson.name.use
Definition

Identifies the purpose for this name.

Shortusual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Control0..01
BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

The use of a human name.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. RelatedPerson.name.text
Definition

Nombre completo de la persona relacionada.


Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

ShortNombre completo de la persona relacionada.Text representation of the full name
Comments

Se espera que la persona relacionada tenga al menos un nombre y un apellido.


Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

A renderable, unencoded form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. RelatedPerson.name.family
Definition

Apellidos de la persona relacionada.


The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

ShortApellidos de la persona relacionada.Family name (often called 'Surname')
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namessurname
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. RelatedPerson.name.given
Definition

Nombres de la persona relacionada.


Given name.

ShortNombres de la persona relacionada.Given names (not always 'first'). Includes middle names
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Control10..1*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. RelatedPerson.telecom
Definition

Detalles de contacto de la persona relacionada con el paciente.


A contact detail for the person, e.g. a telephone number or an email address.

ShortMedios de contacto de la persona relacionada (teléfono, email, etc.).A contact detail for the person
Comments

Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

Control10..2*
TypeContactPoint(Contacto para Receta Digital Costa Rica)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

People have (primary) ways to contact them in some way such as phone, email.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. RelatedPerson.gender
Definition

Género de la persona relacionada para fines administrativos, puede ser distinto al sexo biológico.


Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

ShortGénero con el que se identifica la persona relacionada. (male | female)male | female | other | unknown
Control10..1
BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
(required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

The gender of a person used for administrative purposes.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Needed for identification of the person, in combination with (at least) name and birth date.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. RelatedPerson.birthDate
Definition

Fecha de nacimiento de la persona relacionada.


The date on which the related person was born.

ShortFecha de nacimiento de la persona relacionada.The date on which the related person was born
Comments

Proporciona un dato altamente discriminativo. Combinado con el nombre, permite resolver duplicados y colisiones.

Control10..1
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. RelatedPerson.address
Definition

Dirección donde reside o puede ser ubicada la persona relacionada.


Address where the related person can be contacted or visited.

ShortDirección física de la persona relacionada.Address where the related person can be contacted or visited
Control10..1*
TypeAddress(Dirección para Receta Digital Costa Rica)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to keep track where the related person can be contacted per postal mail or visited.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. RelatedPerson
2. RelatedPerson.id
Definition

Identificador único de la persona relacionada dentro del sistema.

ShortIdentificador único de la persona relacionada dentro del sistema.
Comments

Este es el identificador único de la persona relacionada dentro del sistema.

4. RelatedPerson.meta
Control0..0
6. RelatedPerson.identifier
Definition

Este es el listado de identificaciones de una persona relacionada con el paciente.

ShortLista de los identificadores de la persona relacionada.
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..1
Must Supporttrue
8. RelatedPerson.identifier.use
Fixed Valueofficial
10. RelatedPerson.identifier.type
Definition

Se define como tipo de documento de identificación, referente a los tipos definidos en el sistema para personas relacionadas.

ShortTipo de documento de identificación (Extensible)
Control1..?
BindingThe codes SHALL be taken from Tipo de identificación
(required to https://ministeriodesalud.go.cr/fhir/receta/ValueSet/idTypes)

ValueSet de tipos de identificación permitidos para personas relacionadas en Costa Rica.

12. RelatedPerson.identifier.type.coding
Definition

Código de tipo de identificación de la persona relacionada.

ShortCódigo de tipo de identificación de la persona relacionada.
Comments

Código de tipo de identificación de la persona relacionada.

Control1..1
14. RelatedPerson.identifier.type.coding.system
Definition

Sistema de identificación de la persona relacionada.

ShortSistema de identificación de la persona relacionada.
Comments

Sistema de identificación de la persona relacionada.

16. RelatedPerson.identifier.type.coding.code
Definition

Código del tipo de identificación de la persona relacionada.

ShortCódigo del tipo de identificación de la persona relacionada.
Comments

Código del tipo de identificación de la persona relacionada.

Control1..?
18. RelatedPerson.identifier.type.coding.display
Definition

Descripción del código de tipos de identificación para la persona relacionada.

ShortDescripción del código de tipos de identificación para la persona relacionada.
Comments

Descripción del código de tipos de identificación para la persona relacionada.

20. RelatedPerson.identifier.type.text
Definition

Nombre del valor de tipo de identificación de la persona relacionada.

ShortNombre del valor de tipo de identificación de la persona relacionada.
Comments

Nombre del valor de tipo de identificación de la persona relacionada.

22. RelatedPerson.identifier.system
Definition

Sistema de identificación de la persona relacionada.

ShortSistema de identificación de la persona relacionada.
Comments

Sistema de identificación de la persona relacionada.

24. RelatedPerson.identifier.value
Definition

Número de identificación o documento de la persona relacionada.

ShortNúmero de identificación o documento de la persona relacionada.
Comments

Número de identificación o documento de la persona relacionada.

Control1..?
26. RelatedPerson.patient
Definition

Referencia al recurso Patient al que está asociada esta persona relacionada (por ejemplo, un familiar o cuidador).

ShortPaciente vinculado a la persona relacionada.
Comments

Esta referencia debe apuntar únicamente a un recurso Patient.

TypeReference(Patient)
Must Supporttrue
28. RelatedPerson.patient.reference
Definition

Identificador del recurso Patient vinculado a esta persona relacionada.

ShortReferencia al paciente
Control1..?
30. RelatedPerson.patient.display
Definition

Nombre del paciente con quien está relacionada esta persona.

ShortNombre del paciente
32. RelatedPerson.name
Definition

Nombre completo de la persona relacionada con el paciente.

ShortNombre de la persona relacionada.
Comments

Es un elemento clave para la identificación inicial. En Costa Rica, los nombres tienen alta especificidad (dos apellidos), lo que aumenta la precisión del matching.

Control1..1
Must Supporttrue
34. RelatedPerson.name.use
Control0..0
36. RelatedPerson.name.text
Definition

Nombre completo de la persona relacionada.

ShortNombre completo de la persona relacionada.
Comments

Se espera que la persona relacionada tenga al menos un nombre y un apellido.

Control1..?
38. RelatedPerson.name.family
Definition

Apellidos de la persona relacionada.

ShortApellidos de la persona relacionada.
Control1..?
40. RelatedPerson.name.given
Definition

Nombres de la persona relacionada.

ShortNombres de la persona relacionada.
Control1..1
42. RelatedPerson.telecom
Definition

Detalles de contacto de la persona relacionada con el paciente.

ShortMedios de contacto de la persona relacionada (teléfono, email, etc.).
Control1..2
TypeContactPoint(Contacto para Receta Digital Costa Rica)
Must Supporttrue
44. RelatedPerson.gender
Definition

Género de la persona relacionada para fines administrativos, puede ser distinto al sexo biológico.

ShortGénero con el que se identifica la persona relacionada. (male | female)
Control1..?
46. RelatedPerson.birthDate
Definition

Fecha de nacimiento de la persona relacionada.

ShortFecha de nacimiento de la persona relacionada.
Comments

Proporciona un dato altamente discriminativo. Combinado con el nombre, permite resolver duplicados y colisiones.

Control1..?
48. RelatedPerson.address
Definition

Dirección donde reside o puede ser ubicada la persona relacionada.

ShortDirección física de la persona relacionada.
Control1..1
TypeAddress(Dirección para Receta Digital Costa Rica)
Must Supporttrue

Guidance on how to interpret the contents of this table can be foundhere

0. RelatedPerson
Definition

Information about a person that is involved in the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process.

ShortA person that is related to a patient, but who is not a direct target of care
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. RelatedPerson.id
Definition

Identificador único de la persona relacionada dentro del sistema.

ShortIdentificador único de la persona relacionada dentro del sistema.
Comments

Este es el identificador único de la persona relacionada dentro del sistema.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. RelatedPerson.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..0
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. RelatedPerson.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. RelatedPerson.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. RelatedPerson.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. RelatedPerson.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. RelatedPerson.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. RelatedPerson.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. RelatedPerson.identifier
Definition

Este es el listado de identificaciones de una persona relacionada con el paciente.

ShortLista de los identificadores de la persona relacionada.
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..1
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. RelatedPerson.identifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
22. RelatedPerson.identifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on RelatedPerson.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 24. RelatedPerson.identifier.use
    Definition

    The purpose of this identifier.

    Shortusual | official | temp | secondary | old (If known)
    Comments

    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

    Control0..1
    BindingThe codes SHALL be taken from IdentifierUse
    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

    Identifies the purpose for this identifier, if known .

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

    Fixed Valueofficial
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. RelatedPerson.identifier.type
    Definition

    Se define como tipo de documento de identificación, referente a los tipos definidos en el sistema para personas relacionadas.

    ShortTipo de documento de identificación (Extensible)
    Comments

    This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

    Control1..1
    BindingThe codes SHALL be taken from Tipo de identificación
    (required to https://ministeriodesalud.go.cr/fhir/receta/ValueSet/idTypes)

    ValueSet de tipos de identificación permitidos para personas relacionadas en Costa Rica.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows users to make use of identifiers when the identifier system is not known.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. RelatedPerson.identifier.type.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    30. RelatedPerson.identifier.type.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on RelatedPerson.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 32. RelatedPerson.identifier.type.coding
      Definition

      Código de tipo de identificación de la persona relacionada.

      ShortCódigo de tipo de identificación de la persona relacionada.
      Comments

      Código de tipo de identificación de la persona relacionada.

      Control1..1
      TypeCoding
      Is Modifierfalse
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. RelatedPerson.identifier.type.coding.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      36. RelatedPerson.identifier.type.coding.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on RelatedPerson.identifier.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 38. RelatedPerson.identifier.type.coding.system
        Definition

        Sistema de identificación de la persona relacionada.

        ShortSistema de identificación de la persona relacionada.
        Comments

        Sistema de identificación de la persona relacionada.

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to be unambiguous about the source of the definition of the symbol.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. RelatedPerson.identifier.type.coding.version
        Definition

        The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

        ShortVersion of the system - if relevant
        Comments

        Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

        NoteThis is a business version Id, not a resource version Id (see discussion)
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. RelatedPerson.identifier.type.coding.code
        Definition

        Código del tipo de identificación de la persona relacionada.

        ShortCódigo del tipo de identificación de la persona relacionada.
        Comments

        Código del tipo de identificación de la persona relacionada.

        Control1..1
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to refer to a particular code in the system.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. RelatedPerson.identifier.type.coding.display
        Definition

        Descripción del código de tipos de identificación para la persona relacionada.

        ShortDescripción del código de tipos de identificación para la persona relacionada.
        Comments

        Descripción del código de tipos de identificación para la persona relacionada.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. RelatedPerson.identifier.type.coding.userSelected
        Definition

        Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

        ShortIf this coding was chosen directly by the user
        Comments

        Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

        Control0..1
        Typeboolean
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. RelatedPerson.identifier.type.text
        Definition

        Nombre del valor de tipo de identificación de la persona relacionada.

        ShortNombre del valor de tipo de identificación de la persona relacionada.
        Comments

        Nombre del valor de tipo de identificación de la persona relacionada.

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. RelatedPerson.identifier.system
        Definition

        Sistema de identificación de la persona relacionada.

        ShortSistema de identificación de la persona relacionada.
        Comments

        Sistema de identificación de la persona relacionada.

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        ExampleGeneral: http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        52. RelatedPerson.identifier.value
        Definition

        Número de identificación o documento de la persona relacionada.

        ShortNúmero de identificación o documento de la persona relacionada.
        Comments

        Número de identificación o documento de la persona relacionada.

        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        ExampleGeneral: 123456
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        54. RelatedPerson.identifier.period
        Definition

        Time period during which identifier is/was valid for use.

        ShortTime period when id is/was valid for use
        Control0..1
        TypePeriod
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        56. RelatedPerson.identifier.assigner
        Definition

        Organization that issued/manages the identifier.

        ShortOrganization that issued id (may be just text)
        Comments

        The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

        Control0..1
        TypeReference(Organization)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        58. RelatedPerson.active
        Definition

        Whether this related person record is in active use.

        ShortWhether this related person's record is in active use
        Comments

        This element is labeled as a modifier because it may be used to mark that the resource was created in error.

        Control0..1
        Typeboolean
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to be able to mark a related person record as not to be used, such as if it was created in error.

        Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        60. RelatedPerson.patient
        Definition

        Referencia al recurso Patient al que está asociada esta persona relacionada (por ejemplo, un familiar o cuidador).

        ShortPaciente vinculado a la persona relacionada.
        Comments

        Esta referencia debe apuntar únicamente a un recurso Patient.

        Control1..1
        TypeReference(Patient)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        We need to know which patient this RelatedPerson is related to.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        62. RelatedPerson.patient.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        64. RelatedPerson.patient.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on RelatedPerson.patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 66. RelatedPerson.patient.reference
          Definition

          Identificador del recurso Patient vinculado a esta persona relacionada.

          ShortReferencia al paciente
          Comments

          Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

          Control1..1
          This element is affected by the following invariants: ref-1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          68. RelatedPerson.patient.type
          Definition

          The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

          The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

          ShortType the reference refers to (e.g. "Patient")
          Comments

          This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from ResourceType
          (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)

          Aa resource (or, for logical models, the URI of the logical model).

          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          70. RelatedPerson.patient.identifier
          Definition

          An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

          ShortLogical reference, when literal reference is not known
          Comments

          When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

          When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

          Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

          Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          72. RelatedPerson.patient.display
          Definition

          Nombre del paciente con quien está relacionada esta persona.

          ShortNombre del paciente
          Comments

          This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          74. RelatedPerson.relationship
          Definition

          The nature of the relationship between a patient and the related person.

          ShortThe nature of the relationship
          Control0..*
          BindingThe codes SHOULD be taken from PatientRelationshipType
          (preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype|4.0.1)

          The nature of the relationship between a patient and the related person.

          TypeCodeableConcept
          Is Modifierfalse
          Summarytrue
          Requirements

          We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          76. RelatedPerson.name
          Definition

          Nombre completo de la persona relacionada con el paciente.

          ShortNombre de la persona relacionada.
          Comments

          Es un elemento clave para la identificación inicial. En Costa Rica, los nombres tienen alta especificidad (dos apellidos), lo que aumenta la precisión del matching.

          Control1..1
          TypeHumanName
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          78. RelatedPerson.name.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          80. RelatedPerson.name.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on RelatedPerson.name.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 82. RelatedPerson.name.use
            Definition

            Identifies the purpose for this name.

            Shortusual | official | temp | nickname | anonymous | old | maiden
            Comments

            Applications can assume that a name is current unless it explicitly says that it is temporary or old.

            Control0..0
            BindingThe codes SHALL be taken from NameUse
            (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

            The use of a human name.

            Typecode
            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Allows the appropriate name for a particular context of use to be selected from among a set of names.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            84. RelatedPerson.name.text
            Definition

            Nombre completo de la persona relacionada.

            ShortNombre completo de la persona relacionada.
            Comments

            Se espera que la persona relacionada tenga al menos un nombre y un apellido.

            Control1..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            A renderable, unencoded form.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            86. RelatedPerson.name.family
            Definition

            Apellidos de la persona relacionada.

            ShortApellidos de la persona relacionada.
            Comments

            Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

            Control1..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Alternate Namessurname
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            88. RelatedPerson.name.given
            Definition

            Nombres de la persona relacionada.

            ShortNombres de la persona relacionada.
            Comments

            If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

            Control1..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Alternate Namesfirst name, middle name
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            90. RelatedPerson.name.prefix
            Definition

            Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

            ShortParts that come before the name
            Control0..*
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            92. RelatedPerson.name.suffix
            Definition

            Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

            ShortParts that come after the name
            Control0..*
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            94. RelatedPerson.name.period
            Definition

            Indicates the period of time when this name was valid for the named person.

            ShortTime period when name was/is in use
            Control0..1
            TypePeriod
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows names to be placed in historical context.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            96. RelatedPerson.telecom
            Definition

            Detalles de contacto de la persona relacionada con el paciente.

            ShortMedios de contacto de la persona relacionada (teléfono, email, etc.).
            Comments

            Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

            Control1..2
            TypeContactPoint(Contacto para Receta Digital Costa Rica)
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            People have (primary) ways to contact them in some way such as phone, email.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            98. RelatedPerson.gender
            Definition

            Género de la persona relacionada para fines administrativos, puede ser distinto al sexo biológico.

            ShortGénero con el que se identifica la persona relacionada. (male | female)
            Control1..1
            BindingThe codes SHALL be taken from AdministrativeGender
            (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

            The gender of a person used for administrative purposes.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Needed for identification of the person, in combination with (at least) name and birth date.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            100. RelatedPerson.birthDate
            Definition

            Fecha de nacimiento de la persona relacionada.

            ShortFecha de nacimiento de la persona relacionada.
            Comments

            Proporciona un dato altamente discriminativo. Combinado con el nombre, permite resolver duplicados y colisiones.

            Control1..1
            Typedate
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            102. RelatedPerson.address
            Definition

            Dirección donde reside o puede ser ubicada la persona relacionada.

            ShortDirección física de la persona relacionada.
            Control1..1
            TypeAddress(Dirección para Receta Digital Costa Rica)
            Is Modifierfalse
            Must Supporttrue
            Summarytrue
            Requirements

            Need to keep track where the related person can be contacted per postal mail or visited.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            104. RelatedPerson.photo
            Definition

            Image of the person.

            ShortImage of the person
            Control0..*
            TypeAttachment
            Is Modifierfalse
            Summaryfalse
            Requirements

            Many EHR systems have the capability to capture an image of persons. Fits with newer social media usage too.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            106. RelatedPerson.period
            Definition

            The period of time during which this relationship is or was active. If there are no dates defined, then the interval is unknown.

            ShortPeriod of time that this relationship is considered valid
            Control0..1
            TypePeriod
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            108. RelatedPerson.communication
            Definition

            A language which may be used to communicate with about the patient's health.

            ShortA language which may be used to communicate with about the patient's health
            Comments

            If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple RelatedPerson.Communication associations. If the RelatedPerson does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Requirements

            If a related person does not speak the local language, interpreters may be required, so languages spoken and proficiency is an important things to keep track of both for patient and other persons of interest.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            110. RelatedPerson.communication.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            112. RelatedPerson.communication.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            114. RelatedPerson.communication.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            116. RelatedPerson.communication.language
            Definition

            The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

            ShortThe language which can be used to communicate with the patient about his or her health
            Comments

            The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

            Control1..1
            BindingThe codes SHOULD be taken from CommonLanguages
            (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

            A human language.

            Additional BindingsPurpose
            AllLanguagesMax Binding
            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Requirements

            Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            118. RelatedPerson.communication.preferred
            Definition

            Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

            ShortLanguage preference indicator
            Comments

            This language is specifically identified for communicating healthcare information.

            Control0..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Requirements

            People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))